How to Replace Your Traditional Bow Quiver Strap – Step-by-Step Guide

Replacing the rubber quiver strap on your traditional bow quiver is quick and simple. Whether your strap-on bow quiver needs a new grip or you're upgrading your recurve bow quiver, follow these easy steps to get back in action.

What You’ll Need

Your replacement bow quiver strap kit includes:
✅ New rubber quiver strap with attached buttons
✅ Nickel washer
✅ Rubber washer
✅ Flathead screw

 

 

Step 1: Remove the Old Strap

Before installing the new strap, take off the old one. If you're replacing the bow quiver hood strap, remove the foam insert to make installation easier.

Step 2: Assemble the New Strap

  1. Insert the flathead screw through the rubber washer.
  2. Add the nickel washer on the opposite side, forming a secure "sandwich."
  3. Thread the screw through the strap’s designated hole.

Step 3: Attach the Strap to the Quiver

  1. Align the rubber bow quiver strap with the quiver and insert the screw through the existing hole.
  2. Hold the female end of the screw post in place while tightening the screw with a flathead screwdriver or drill.
  3. Ensure the strap is snug but not overtightened.

Step 4: Reassemble and Secure

  1. If you removed the bow quiver foam insert, place it back into the hood.
  2. Thread the strap back onto the strap-on bow quiver, securing it properly.

That’s it—your traditional bow quiver is now ready to go! The process takes less than 60 seconds, ensuring you're back in action without hassle.

Get Your Replacement Quiver Straps Today!

Upgrade your traditional archery gear with durable rubber bow quiver straps from Standing Wolf Archery. Browse our collection of traditional bow quivers and accessories today!